+8618879561688

sales@pcbsupplier.com

Sign in
X
PCBA processing first samples inspection, why is so important?
2022-09-16 76
We can see a lot of various production equipment in the SMD factory, one of the equipment generally does not attract much attention, that is the first sample of inspection instrument. Generally in SMT chip processing, quality and delivery is the most concerned about the majority of customers, in order to protect the quality of SMT chip batch, professional SMT chip processing plant will be the firs...
Read More
HOW TO BUILD PROTOTYPE ELECTRONIC CIRCUITS
2022-09-08 72
WHAT IS PROTOTYPING? In electronics, prototyping means building an actual circuit to a theoretical design to verify that it works. An electronics designer often builds the first prototype from breadboard or stripboard or perfboard and usually uses them to test circuits. They are generally called prototyping boards.   Prototyping boards have holes to which you affix electronic components to bui...
Read More
What is pcb conformal coating and how to paint it
2022-09-05 77
conformal coating painting is a specially formulated coating used to protect circuit boards and their related equipment from environmental erosion. The conformal coating has good resistance to high and low temperatures; its curing into a transparent protective film, with superior insulation, moisture-proof, anti-leakage, shock-proof, dust-proof, anti-corrosion, anti-aging, corona resistance and ot...
Read More
What are the problems that cause poor BGA soldering? These PCB design matters needs attention
2022-09-01 132
One-stop PCBA wise manufacturers today to tell you what causes BGA soldering bad problems?PCB design of several common problems. In PCBA processing, due to improper PCB design, often encounter the problem of poor BGA welding. Next Leadjo PCBA on bad BGA welding PCB design of several common problems summarized analysis.     Incorrect PCB design leads to the analysis of BGA welding defects...
Read More
PCBA Special Reminders
2022-03-14 324
Handing over the PCB manufacturing to the professional assembly house doesn't mean there is nothing to do with you, electronics manufacturing is a very specific work, we will ask the clients to provide the necessary data before delegating the PCB manufacturing work to us. There are certainly many things you can do to lead the PCB manufacturing process to better output, I listed 10 of them as follo...
Read More
Panel Requirements
2022-03-14 183
Advanced Printed Circuit Board Laminate Materials We work with top PCB laminate providers to bring you a wide range of material options such as enhanced epoxy laminates, ultra-low moisture materials, high-frequency ceramic filled laminates, UL 94V-0 rated, RoHS compliant, and more. Your choice of laminate material will depend on your design and application. If you need assistance selecting your pr...
Read More
Panel Requirements for PCB Assembly
2022-03-14 158
Omni pcb does PCB Assembly panel production with min size 50*50mm, max size 310*410mm. We can manufacture circuit boards based on your panelized PCB file. If you only have single PCB file, we can help panelize design according to your specific demands, then manfuacture the boards. Feel free to send us a message if you need assistance in PCB Assembly panel, we'll react accordingly. 1. Panel with V-...
Read More
Components Sourcing
2022-03-14 163
Immaculate Component Sourcing Made Simple Getting the right components for your PCB is the first step towards engineering the product functionalities you seek. Even a small mishap in the process can lead to capital losses, functional asymmetries in the expected & real performance, as well as operational hazards caused by the delay and change orders. While every enterprise and individual working wi...
Read More
Through-hole Assembly
2022-03-14 166
Through holes on a PCB refer to a hole that is drilled from the top and through to the bottom of a PCB, these can be plated (PTH) or non-plated (NPTH). Through-hole technology, also spelled “thru-hole”, refers to the mounting scheme used for electronic components that involves the use of leads on the components that are inserted into holes drilled in PCBs and soldered to pads on the opposite side...
Read More
BGA Assembly Capabilities
2022-03-14 143
BGAs (Ball Grid Arrays) are SMD components with connections on the bottom of the component. Each pin is provided with a solder ball. All connections are distributed in a uniform surface grid or matrix on the component. Common grids are nowadays: 1.27 mm - 1.00 mm - 0.80 mm - 0.50 mm. With several hundred component connections, the number of „routable" pins is limited per layer. The inner pins of t...
Read More
BGA
2022-03-14 112
Ball Grid Array (BGA): Features, Soldering Technique, and X-Ray Inspection Electronic devices are shrinking in size and increasing in complexity due to improvements in VLSI technology. The need for more interfacing input/output (I/O) leads and smaller device sizes have increased and this need can be met with the BGA (Ball Grid Array) package. Electronic devices are shrinking in size and increasing...
Read More
Mixed Assembly Advantages
2022-03-14 119
Though surface mount technology has become the main mounting method in PCB manufacturing, there are still some components that are not suitable in SMT assembly. Then SMT assembly and THT assembly need to be applied on the same board. This combination of assembly technologies is called a mixed assembly, which does not use solder paste during the manufacturing process. Most of the components are wel...
Read More
BLOG LIST
Quote

Assembly Package(.zip)

Turnkey

Yes    No 
E-mail Skype Whatsapp